File name: Siemens skd60 manual pdf
Rating: 4.5 / 5 (3294 votes)
Downloads: 5169
Download link: >>CLICK HERE<<
Loosen the yoke nuts using amm Allen wrench in the actuator yoke. Continue with Mounting an Actuator to a Valve Siemens Electrohydraulic actuators for valves CM1Nen Building Technologies Use For the operation of Siemensport andport valves, types VVF.., VVG.., VXFand VXGwith amm stroke as control and safety shut-off valves in heating, ventilation and air conditioning systems. SKDSeries controller pdf manual download. Also for: Skdseries, Skd • Manual adjuster and position indicator Positioning force N For direct mounting on valves; no adjustments required Additional functions with auxiliary switch, stem heater Disconnect the wires and conduit, if installed. Simultaneously the return spring is compressed. In the manual operation mode the control signals Y and Z can further open the valve but cannot move to the «0%» stroke position of the valve Siemens Industry CatalogBuilding TechnologiesHVAC productsValves and actuatorsActuators for globe and pressure independent control valves (PICV)ElectrohydraulicElectrohydraulic‚ positioning force N N: SKD Siemens Industry CatalogBuilding TechnologiesHVAC productsValves and actuatorsActuators for globe and pressure independent control valves (PICV)ElectrohydraulicElectrohydraulic‚ positioning force N N: SKD/ SKB/ SKCSKD60/SKDElectrohydraulic actuators N for valves withmm stroke Turning the manual adjuster (1) clockwise moves the pressure cylinder downwards and opens the valve. Types Type Operating voltage Positioning signal Turning the manual adjuster (1) clockwise moves the pressure cylinder downwards and opens the valve. Loosen the valve stem retainer using amm Allen wrench and lower the valve stem into the valve. Actuators for valves. Simultaneously the return spring is compressed. In the manual SKD ∂ SKD Operating voltage AC V,position control signalSiemens Electrohydraulic actuators for valves CM1Nen Building Technologies After the spindle coupling has been correctly mounted, a manual calibration must be carried out for continuous actuators (SKD60, SKD60U, SKD62, SKD62U, SKD62UA) View and Download Siemens SKDSeries mounting instructions online. Remove the actuator from the valve, being careful not to damage the valve stem.
