File name: Skd62 siemens pdf
Rating: 4.3 / 5 (4316 votes)
Downloads: 48202
Download link: >>CLICK HERE<<
Loosen the valve stem retainer using amm Allen wrench and lower the valve stem into the valve. Field of application in accordance with IEC Class 3KAmbient temperatures+°C. Disconnect the wires and conduit, if installed. Remove the actuator from the valve, being careful not to damage the valve stem. Continue with Mounting an Actuator to a Valve Siemens Building Technologies Electro-hydraulic actuators for valves CM1NE HVAC Products The SKD, SKD, SKDUand SKD actuators, which feature a spring-return function, incorporate an additional solenoid valve which opens if the control signal or power fails For the operation of Siemens two-port and three-port valves, types VVF, VVG, VPF, VXF and VXG with amm stroke. Mechanical coupling of the actuator SKD with a Siemens valve. Mechanical coupling of the SKD SKD SKD Operating voltage AC V,position control signal •SKD Operating voltage ACV,position control signal •SKD Operating voltage ACV, Remove the actuator cover. Loosen the valve stem retainer using amm Allen wrench and lower the valve stem into the valveDisconnect the wires and conduit, if installed. Loosen the yoke nuts using a SKD60, SKD, SKD62/MO In order to determine the stroke positions 0% and % in the valve, calibration is required on initial commissioning. Loosen the valve stem retainer using amm Allen wrench and lower the valve stem into the valve. Actuator must bin in „Automatic operation mode“ enabling stroke calibration to capture the effective 0% and % values SKD SKD en Mounting instructions Actuators fr Instructions de montage Servomoteur sv Monteringsinstruktion Ställdon nl Montagehandleiding Servomotoren it Istruzioni di montaggio Servocomandi fi Asennusohje Toimimoottorit es Instrucciones de montaje Actuadores da Monteringsvejledning Motorer pl Instrukcja montażu Siłowniki cz Loosen the yoke nuts using amm Allen wrench in the actuator yoke. Siemens Building Technologies Electro-hydraulic actuators for valves CM1NE HVAC Products The SKD, SKD, SKDUand SKD actuators, Disconnect the wires and conduit, if installed. Temperature of medium in the connected valve+ °C SKD60, SKD, SKD62/MO In order to determine the stroke positions 0% and % in the valve, calibration is required on initial commissioning.
